Search by keywords, then use filters to narrow down results by type, year, topic, or ecosystem.
Displaying 141 - 160 of 185
This paper describes a methodology using LiDAR point clouds with an ultra-high resolution in the characterization of forest fuels for further wildfire prevention and management. Biomass management strips were defined in three case studies using a…
Year Published:
Following publication of the original article (Hyde et al., 2015), the authors have noticed two errors in the summarizing of our results and wish to point out the following corrections:
– The LANDFIRE-FCCS layer showed a 200% higher duff loading…
Year Published:
Background: Soil properties have important effects on fire occurrence and spread, but soils are often overlooked in fire prediction models. Quantifying soil−fire linkages is limited by information in conventional soil maps, but digital soil mapping…
Year Published:
Landsat-based fire severity datasets are an invaluable resource for monitoring and research purposes. These gridded fire severity datasets are generally produced with pre- and post-fire imagery to estimate the degree of fire-induced ecological…
Year Published:
Current assessments of the ecological impacts of fires, termed burn severity, investigate the degree to which an ecosystem has changed due to a fire and typically encompass both vegetation and soil effects. Burn severity assessments at local to…
Year Published:
The water balance in a watershed can be disrupted by forest disturbances such as harvests and fires. Techniques to accurately and efficiently map forest cover changes due to disturbance are evolving quickly, and it is of interest to ask how useful…
Year Published:
Mixed severity wildfires burn large areas in western North America forest ecosystems in most years and this is expected to continue or increase with climate change. Little is understood about vegetation recovery and changing fuel conditions more…
Year Published:
We present a direct broadcast (DB) rapid response burned area mapping algorithm for Visible Infrared Imaging Radiometer Suite (VIIRS) data that combines products driven by the spectral signal of fire-affected areas from both emissive and reflective…
Year Published:
Spruce budworm (SBW) is the most destructive forest pest in eastern forests of North America. Mapping annual current-year SBW defoliation is challenging because of the large landscape scale of infestations, high temporal/spatial variability, and the…
Year Published:
Following a wildfire, flooding and debris- flow hazards are common and pose a threat to human life and infrastructure in steep burned terrain. Wildfire enhances both water runoff and soil erosion, which ultimately shape the debris flow potential.…
Year Published:
With drought across much of the southern and western States, it’s shaping up to be another record year for wildfires. According to the National Oceanic and Atmospheric Administration, May 2018 was the fourthworst May since 2000 in terms of U.S.…
Year Published:
Across the western United States, the three primary drivers of tree mortality and carbon balance are bark beetles, timber harvest, and wildfire. While these agents of forest change frequently overlap, uncertainty remains regarding their interactions…
Year Published:
Wildland fires play a key role in the functioning and structure of vegetation. The availability of sensors aboard satellites, such as Moderate Resolution Imaging Spectroradiometer (MODIS), makes possible the construction of a time series of…
Year Published:
Wildfire behavior depends on the type, quantity, and condition of fuels, and the effect that bark beetle outbreaks have on fuels is a topic of current research and debate. Remote sensing can provide estimates of fuels across landscapes, although few…
Year Published:
LANDFIRE’s suite of spatial data layers are a valuable resource for land managers because they stretch “wall-to-wall” across the US, are created with a consistent methodology and are updated over time. These data are designed to support broad-…
Year Published:
Forests historically associated with frequent fire have changed dramatically due to fire suppression and past harvesting over the last century. The buildup of ladder fuels, which carry fire from the surface of the forest floor to tree crowns, is one…
Year Published:
Characterising radiation from wildland fires is an important focus of fire science because radiation relates directly to the combustion process and can be measured across a wide range of spatial extents and resolutions. As part of a more…
Year Published:
Terrestrial laser scanning (TLS) was used to collect spatially continuous measurements of fuelbed characteristics across the plots and burn blocks of the 2012 RxCADRE experiments in Florida. Fuelbeds were scanned obliquely from plot/block edges at a…
Year Published:
Accurate information about three-dimensional canopy structure and wildland fuel across the landscape is necessary for fire behaviour modelling system predictions. Remotely sensed data are invaluable for assessing these canopy characteristics over…
Year Published:
Attaining fire-adapted human communities has become a key focus of collaborative planning on landscapes across the western United States and elsewhere. The coupling of fire simulation with GIS has expanded the analytical base to support such…
Year Published: